FSU | Academic Program Guide (2024)


College: Engineering
Degree: BS
Specialized Admission: No

Contact: Emily Burgess
Address: 2525 Pottsdamer St., Suite B111, Tallahassee, FL 32310
Phone: (850) 410-6349
Email: eburgess@eng.famu.fsu.edu


Description of Major

*Please Note: Face-to-face/in-person instruction of this program is available at BOTH the main campus in Tallahassee, FL and the Panama City, FL campus. This program is NOT available via Online/Distance Learning.*

The Bachelor of Science (BS) program in the Department of Mechanical Engineering is designed to provide background for a wide variety of careers. The discipline of mechanical engineering is very broad, but generally emphasizes an appropriate mix of thermal science, mechanics and materials, dynamic systems, and design. Graduates typically enter various energy, aerospace, automotive, product manufacturing industries, or government laboratories.

The undergraduate program is designed to impart a broad knowledge in basic and engineering sciences and to provide a solid understanding of contemporary engineering practices. The program also seeks to provide students with a foundation in communications skills, principles of economics, and other fundamentals upon which they will draw in their professional careers. Special emphasis is placed on communications skills by requiring extensive written laboratory reports and design project presentations. Computer literacy is bolstered by a variety of course assignments throughout the program and especially in the design courses, wherein students are exposed to several design software programs widely used in the engineering industry.

ABET
The Accreditation Board for Engineering and Technology (ABET) requires that all students graduating from an ABET-accredited program meet certain requirements. Completion of the A. A. degree will not meet these requirements. Prospective majors should select courses after consulting an advisor.


Prerequisite Coursework

The following are the state-wide common prerequisites. Those in BOLD are the required prerequisites that students must complete for admission into this major at FSU in preparation for the upper division major. Those in ITALIC are

strongly encouraged

to be taken. Students are encouraged to complete these in the freshman and sophomore years. All may also apply to other requirements. This program will be operated using the existing common program prerequisites:

MAC X311 (4) Calculus I or MACX281 (4) Engineering Calculus I
MAC X312 Calculus II (4) or MACX282 (4) Engineering Calculus II
MAC X313 Calculus III (4) or MAC X283 (4) Engineering Calculus III
MAPX302 (3) Ordinary Differential Equations or MAP X305(3) Engineering Math I
CHM X045/X045L (4) or CHM X045C (4) General Chemistry I and Lab, or CHS X440/X440L (4) or CHM X095/X095L (4)
PHY X048/X048L (4) or PHY X048C (5) General Physics A with Lab or PHY X043 and PHY X048L
PHY X049/X049L (4) or PHY X049C (5) General Physics B with Lab or PHY X044 and PHY X049L

Note: State-wide common prerequisites are always under review. Please visit https://cpm.flvc.org/programs/1772/5031 for a current list of state-approved prerequisites.

Pre-Engineering Program Requirements:
All students are placed in a Pre-Major Engineering code until all of the prerequisites have been completed. Students must earn a grade of "C minus" or better on the first attempt of the courses designated in our Pre-Engineering curriculum (Calculus I, Calculus II, General Physics I with calculus*, Pre-Engineering Lab) at any institution attended. One repeated attempt out of all pre-engineering courses is permitted. (* students who wish to major in Chemical or Biomedical Engineering shall replace Physics I with General Chemistry I for their Pre-Engineering sequence).

Requirements for Progression to the Upper-Division:
To be admitted, students must complete at least 52 hours of credit with an FSU GPA of a 2.00, including at least one-half of the required hours in the General Education program, including all of the Area I English and math. In addition, students must earn a grade of 'C minus' or better in MAC2311. Students must not be in violation of the pre-engineering program requirements.

Transfer Requirements:
Students wishing to transfer into the FAMU-FSU College of Engineering must meet the following criteria:

• Must earn a grade of "C minus" or better on the first attempt of the courses designated in the Pre-Engineering curriculum (Calculus I, Calculus II, General Physics I with calculus*, Pre-Engineering Lab) at any institution attended. One repeated attempt out of all pre-engineering courses is permitted. (* students who wish to major in Chemical or Biomedical Engineering shall replace Physics I with General Chemistry I for their Pre-Engineering sequence).

• Transfer students who have one repeated attempt in the pre-engineering courses must have already completed all pre-engineering courses (excluding Pre-Engineering Lab).

• Transfer students who will earn an AA or have more than 60 hours of transfer credit prior to enrollment at the College must have completed at least Calculus I. It is strongly preferred that AA transfer students have the majority of the pre-engineering courses completed before arriving (excluding Pre-Engineering Lab).


Requirements

Major Program of Studies at FSU: (107-108 hours)

Unless otherwise noted, students must complete all major coursework with a final grade of C or better.

Mathematics and Basic Sciences: (36-37 hours)
CHM 1045General Chemistry I (3)
CHM 1045LGeneral Chemistry I Laboratory (1)
COP 3014Programming I (3)
MAC 2311Calculus with Analytical Geometry I (4)
MAC 2312Calculus with Analytical Geometry II (4)
MAC 2313Calculus with Analytical Geometry III (5)
MAP 2302 Ordinary Differential Equations (3)
PHY 2048CGeneral Physics A (5)
PHY 2049CGeneral Physics B (5)
XXX XXXX Math Option (3-4)

The math option is intended to provide additional math expertise oriented toward various areas of engineering. Students must choose from the following list of approved classes: MAS 3105 or STA 3032, Alternates: EGN3454, MAD 3401, MAD 3703, MAP 3306 or MAP 4341.

General Engineering Core: (4 hours)
EGN1004L First Year Engineering Laboratory (1)
EEL 3003 Introduction to Electrical Engineering (3)

Required Mechanical Engineering: (67 hours)
EML 3102 Engineering Thermodynamics (3)
EML 3002L Mechanical Engineering Tools Lab (3)
EML 3004 Engineering Statics (3)
EML 3011 Mechanics of Materials (3)
EML 3012 Intermediate Mechanics and Materials (3)
EML 3012L Mechanics and Materials Lab (1)
EML 3013 Dynamics (3)
EML 3014C System Dynamics & Vibrations (3)
EML 3015C Thermal-Fluids I: Fluid Mechanics (4)
EML 3016 Thermal-Fluids II: Heat Transfer (3)
EML 3017C Mechanical Systems I (4)
EML 3018C Mechanical Systems II (4)
EML 3234 Materials Science and Engineering (3)
EML 3811 Introduction to Mechatronics I (1)
EML 3811L Mechatronics Lab (2)
EML 4304 Experiments in Thermal and Fluid Sciences (2)
EML 4304L Experiments in Thermal and Fluid Sciences Lab (1)
EML 4550 Engineering Design Methods (3)
EML 4551C Senior Design Project I (3)
EML 4552C Senior Design Project II (3)
XXX XXXX Technical Electives (12)

Technical electives are generally intended to develop depth in an area of interest and should form a coherent area of concentration or multidisciplinary focus. A minimum of three technical electives (nine semester hours) must be in Mechanical Engineering. All technical elective courses must be selected from the approved list of suitable technical elective courses posted on the Departmental Web site.

EML 3004 includes a math/physics test based on the material covered in Calculus I, Calculus II, and Physics I. Students may take this test at any time before or during their enrollment in EML 3004.

Digital Literacy: (0 hours beyond major)
EML4550 (3) Engineering Design Methods meets this requirement for the major.

Upper Division Writing (UDW): (0 hours beyond major)
Undergraduate majors in mechanical engineering satisfy the Upper Division Writing (UDW) requirement by earning a grade of “C minus” or higher in EML 3012L Mechanics and Materials Lab (1).

Scholarship in Practice (SIP) and Oral Communication Competency Requirement (OCCR): (0 hours beyond major)
Undergraduate majors in mechanical engineering satisfy both the Scholarship in Practice (SIP) and Oral Communication Competency requirements by earning a grade of “C” or higher in both EML 4551C Senior Design Project I (3) and EML 4552C Senior Design Project II (3).

Minimum Program Requirements - Summary

Total Hrs. Required: 128
General Education: 36
Major Coursework: 107-108
Minor Coursework: 0
Digital Literacy: 0 beyond major coursework
Upper Division Writing: 0 beyond major coursework
Scholarship in Practice: 0 beyond major coursework
Oral Communication Competency: 0 beyond major coursework
Electives: 0

*Note: Engineering students satisfy the natural science and the mathematics area requirements of General Education through coursework in the Engineering Core. Students not prepared to begin mathematics with Calculus I (MAC 2311) will need to take additional prerequisite hours in mathematics: MAC 1105, 1114, and/or 1140. All students should take the math placement test (ALEKS) to determine proper placement.


Mapping

Mapping is FSU’s academic advising and monitoring system. Academic progress is monitored each Fall and Spring semester to ensure that students are on course to earn their degree in a timely fashion. Transfer students must meet mapping guidelines to be accepted into their majors. You may view the map for this major at www.academic-guide.fsu.edu/.


Remarks

1. A minimum of 45 hours at the 3000 level or above, 30 of which must be taken at this University.
2. Half of the major course semester hours must be completed in residence at this University.
3. The final 30 hours must be completed in residence at this University.


Employment Information

Salary Information:

National Association of Colleges and Employers (www.naceweb.org) or the Occupational Outlook Handbook (www.bls.gov/ooh/home.htm) provided by the U.S. Bureau of Labor Statistics.

Job Titles Related to this Major with a Bachelor of Science in Mechanical Engineering:

Basic Engineering: Applied Mechanics, Bioengineering, Fluids Engineering, Heat Transfer, Tribology. Energy Conversion: Internal Combustion Engines, Fuels and Combustion Technologies, Gas Turbine, Nuclear Engineering, Power. Energy Resources: Advanced Energy Systems, Ocean Engineering, Petroleum, Solar Energy. Environment and Transportation: Aerospace, Air Pollution Control, Noise Control and Acoustics, Rail Transportation, Solid Waste Processing. General Engineering: Management, Safety, Technology and Society. Materials and Structures: Materials, Pressure Vessels and Piping, NDE Engineering, Offshore Mechanics and Arctic Engineering. Manufacturing: Materials Handling Engineering, Plant Engineering and Maintenance, Process Industries, Production Engineering, Textile Industries. Systems and Design: Computer Engineering, Design Engineering, Dynamic Systems and Control, Electrical and Electronic Packaging.

Representative Employers:

Government, Private Business, Industry, Education

View Engineering (Mechanical) Academic Map

FSU | Academic Program Guide (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Roderick King

Last Updated:

Views: 5247

Rating: 4 / 5 (51 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Roderick King

Birthday: 1997-10-09

Address: 3782 Madge Knoll, East Dudley, MA 63913

Phone: +2521695290067

Job: Customer Sales Coordinator

Hobby: Gunsmithing, Embroidery, Parkour, Kitesurfing, Rock climbing, Sand art, Beekeeping

Introduction: My name is Roderick King, I am a cute, splendid, excited, perfect, gentle, funny, vivacious person who loves writing and wants to share my knowledge and understanding with you.